View HDSP-G03Y_1248724.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Agilent HDSP-G01x/G03x 10.16 mm (0.4 inch) Dual Digit General Purpose Seven-Segment Display
Data Sheet
Features * Industry standard size * Industry standard pinout 10.16 mm (0.4 inch) DIP lead on 2.54 mm * Choice of colors High Efficiency Red (HER), Green, AlGaAs Red and Yellow * Excellent appearance Evenly lighted segments gray package gives optimum contrast 50 viewing angle * Design flexibility Common anode or common cathode Description This 10.16 mm (0.4 inch) LED dual digit seven-segment display uses industry standard size package and pinout. The device is available in either common anode or common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The gray face displays are suitable for indoor use. * Categorized for luminous intensity Green and yellow categorized for color Applications * Suitable for indoor use * Not recommended for industrial application, i.e., operating temperature requirements exceeding +85C or below -25C[1] * Extreme temperature cycling not recommended
Notes: 1. For additional details, please contact your local Agilent sales office or an authorized distributor.
Devices HER HDSP-G01E HDSP-G03E Green HDSP-G01G HDSP-G03G AlGaAs Red HDSP-G01A HDSP-G03A Yellow HDSP-G01Y HDSP-G03Y Description Common Anode Common Cathode
Part Numbering System
5082 -X X X X-X X X X X HDSP-X X X X-X X X X X Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] A: AlGaAs Red E: High Efficiency Red G: Green Y: Yellow Device Specific Configuration[1] Refer to Respective Datasheet Package[1] G: 10 mm (0.4 inch) Dual Digit Seven Segment Display
Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
2
Package Dimensions
FRONT VIEW
5.90 (0.232)
SIDE VIEW
4.16 (0.164)
8
16.00 10.16 (0.630) (0.400)
1.10 (0.043)
16.00 (0.630)
12.70 (0.500)
10.16 (0.400) 20.20 (0.795)
0.70 (0.028) 6.90 (0.272)
TOP END VIEW
20.20 (0.795)
DIG.1 A F E D COUNTRY OF ORIGIN COLOR BINNING (NOTE 3) 0.51 (0.019) G B C F E
DIG.2 A G B C D
DATE CODE LUMINOUS INTENSITY CATEGORY
HDSP-XXXX YWW XZ COO
NOTE: DECIMAL POINTS WILL NOT BE LIGHTED UP
2.54 x 7 (0.100)
DIMENSIONS ARE IN MILLIMETERS (INCHES).
3
Internal Circuit Diagram
COMMON ANODE 4 COM 5 COM
A 15
B 13
C 1
D 3
E 2
F 14
G 16
A 10
B 12
C 8
D 6
E 7
F 11
G 9
HDSP-G01E/G01G/G01Y/G01A PIN No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CONNECTION CATHODE C (DIGIT 1) CATHODE E (DIGIT 1) CATHODE D (DIGIT 1) COMMON ANODE (DIGIT 1) COMMON ANODE (DIGIT 2) CATHODE D (DIGIT 2) CATHODE E (DIGIT 2) CATHODE C (DIGIT 2) CATHODE G (DIGIT 2) CATHODE A (DIGIT 2) CATHODE F (DIGIT 2) CATHODE B (DIGIT 2) CATHODE B (DIGIT 1) CATHODE F (DIGIT 1) CATHODE A (DIGIT 1) CATHODE G (DIGIT 1)
COMMON CATHODE 4 COM 5 COM
A 15
B 13
C 1
D 3
E 2
F 14
G 16
A 10
B 12
C 8
D 6
E 7
F 11
G 9
HDSP-G03E/G03G/G03Y/G03A PIN No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CONNECTION ANODE C (DIGIT 1) ANODE E (DIGIT 1) ANODE D (DIGIT 1) COMMON CATHODE (DIGIT 1) COMMON CATHODE (DIGIT 2) ANODE D (DIGIT 2) ANODE E (DIGIT 2) ANODE C (DIGIT 2) ANODE G (DIGIT 2) ANODE A (DIGIT 2) ANODE F (DIGIT 2) ANODE B (DIGIT 2) ANODE B (DIGIT 1) ANODE F (DIGIT 1) ANODE A (DIGIT 1) ANODE G (DIGIT 1)
4
Absolute Maximum Ratings at TA = 25C Description Power Dissipation Segment Forward Current Segment Peak Forward Current per Segment (1/10 Duty Factor at 10 KHz) Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wave Soldering Temperature for 3 seconds (at 2 mm Distance from the Body)
Notes: 1. Derate above 25C at 0.33 mA/C. 2. Derate above 25C at 0.33 mA/C. 3. Derate above 25C at 0.2 mA/C. 4. Derate above 25C at 0.27 mA/C.
HER HDSP-G0xE 65 25[1] 100 -35 to +85 -35 to +85 5 250
Green HDSP-G0xG 65 25[2] 100 -35 to +85 -35 to +85 5 250
AlGaAs Red HDSP-G0xA 30 15[3] 80 -35 to +85 -35 to +85 5 250
Yellow HDSP-G0xY 52 20[4] 80 -35 to +85 -35 to +85 5 250
Units mW mA mA C C V C
Electrical/Optical Characteristics at TA = 25C High Efficiency Red (HER) Device HDSPG01E G03E Parameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Symbol IV VF PEAK d VR Min. 1.25 Typ. 1.19 2.60 2.05 635 620 Max. Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA
2.40
5
IR = 100 A
Green Device HDSPG01G G03G Parameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Symbol IV VF PEAK d VR Min. 1.25 1.80 Typ. 3.20 2.05 2.25 568 573 Max. Units mcd V V nm nm V Test Conditions IF = 10 mA IF = 10 mA IF = 20 mA
2.60
5
IR = 100 A
5
AlGaAs Red Device HDSPG01A G03A Parameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Symbol IV VF PEAK d VR Min. 3.20 Typ. 3.66 6.50 1.85 660 643 Max. Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA
2.00
5
IR = 100 A
Yellow Device HDSPG01Y G03Y Parameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Intensity Bin Limits (mcd at 10 mA) Bin Name G H I J K L HER/Green Min.[1] NA 1.251 2.001 3.201 NA NA Max.[1] NA 2.000 3.200 5.050 NA NA Yellow Min.[1] 0.801 1.251 2.001 NA NA NA Max.[1] 1.250 2.000 3.200 NA NA NA AlGaAs Red Min.[1] Max.[1] NA NA NA NA NA NA 3.201 5.050 5.051 8.000 8.001 12.650 Symbol IV VF PEAK d VR Min. 0.80 Typ. 0.77 1.50 2.15 595 590 5 Max. Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA
2.60
IR = 100 A
Note: 1. Tolerance for each bin limit is 10%.
Color Bin Limits (nm at 10 mA) Color Green Bin 3 4 5 1 2 3 Dominant Wavelength (nm) Min.[1] Max.[1] 569.1 571.0 571.1 573.0 573.1 575.0 585.5 588.5 588.5 591.5 591.5 594.5
Yellow
Note: 1. Tolerance for each bin limit is 1 nm.
6
High Efficiency Red (HER)
IF - FORWARD CURRENT PER SEGMENT - mA
MAXIMUM DC CURRENT PER SEGMENT - mA
30 HIGH EFFICIENCY RED (HER) 25 20 15 10 5 0
120 100 80 60 40 20 0
0
20
40
60
80
100
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
TA - AMBIENT TEMPERATURE - C
VF - FORWARD VOLTAGE - V
Figure 1. Maximum allowable average or DC current vs. ambient temperature.
Figure 2. Forward current vs. forward voltage.
2.5
RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA)
1.4
RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA)
1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50
2.0
1.5
1.0
0.5
0
0
5
10
15
20
25
30
35
IF - FORWARD CURRENT FOR SEGMENT - mA
IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA
Figure 3. Relative luminous intensity vs. DC forward current.
Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current.
7
Green
30 GAP GREEN 25 20 15 10 5 0
IF - FORWARD CURRENT PER SEGMENT - mA
MAXIMUM DC CURRENT PER SEGMENT - mA
120 100 80 60 40 20 0
0
20
40
60
80
100
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
TA - AMBIENT TEMPERATURE - C
VF - FORWARD VOLTAGE - V
Figure 5. Maximum allowable average or DC current vs. ambient temperature.
Figure 6. Forward current vs. forward voltage.
3.5
RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA)
1.2
3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 IF - FORWARD CURRENT FOR SEGMENT - mA
RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA)
1.0 0.8 0.6 0.4 0.2 0
0
5 10 15 20 25 30 35 40 45 50 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA
Figure 7. Relative luminous intensity vs. DC forward current.
Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current.
8
AlGaAs Red
16 14 12 10 8 6 4 2 0 0 20 40 60 80 100 AIGaAs RED
IF - FORWARD CURRENT PER SEGMENT - mA
MAXIMUM DC CURRENT PER SEGMENT - mA
120 100 80 60 40 20 0
0
0.5
1.0
1.5
2.0
2.5
TA - AMBIENT TEMPERATURE - C
VF - FORWARD VOLTAGE - V
Figure 9. Maximum allowable average or DC current vs. ambient temperature.
Figure 10. Forward current vs. forward voltage.
3.0
RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA)
1.2
RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA)
2.5 2.0 1.5 1.0 0.5 0
1.0 0.8 0.6 0.4 0.2 0
0
5
10
15
20
25
30
35
0
5 10 15 20 25 30 35 40 45 50 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA
IF - FORWARD CURRENT FOR SEGMENT - mA
Figure 11. Relative luminous intensity vs. DC forward current.
Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current.
9
Yellow
25 YELLOW 20
IF - FORWARD CURRENT PER SEGMENT - mA
MAXIMUM DC CURRENT PER SEGMENT - mA
120 100 80 60 40 20 0
15
10
5
0
0
20
40
60
80
100
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
TA - AMBIENT TEMPERATURE - C
VF - FORWARD VOLTAGE - V
Figure 13. Maximum allowable average or DC current vs. ambient temperature.
Figure 14. Forward current vs. forward voltage.
3.5
RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA)
1.4
RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA)
3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 IF - FORWARD CURRENT FOR SEGMENT - mA
1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50
IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA
Figure 15. Relative luminous intensity vs. DC forward current.
Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current.
10
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2004 Agilent Technologies, Inc. July 17, 2004 5988-2972EN

▲Up To Search▲

Price & Availability of HDSP-G03Y

	To Download HDSP-G03Y Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .